Brass handbag snap button making process and maintenance method
The brass handbag snap button is a more important hardware accessory on the bag, which can ensure that the items in the bag will not fall. Do you know how the brass handbag snaps are made? How to maintain the brass handbag snap button? Today, I will tell you about the manufacturing process and maintenance methods of the brass handbag snaps. I hope to help everyone.
Brass handbag snap process
First make a mold. The production of the mold is very important. The first condition for a product to be in this factory is that the manufacturer must know how to make the mold. Because he does not know how to make the mold, he can't determine whether he can make this product.
Secondly, put the finished mold on the die casting machine and die-cast the product. Die-casting machines are divided into tonnages. Ordinary handbags are generally used in 25-tonne die-casting machines. It is also very skillful to use a die-casting machine to lay products. It depends on the skill of the presser. When you want to control the pressure, the pressure will be too large, there will be a lot of burrs and it will cost a lot of electricity. If the pressure is too small, there will be pits on the surface of the product, and the surface of the product will not be smooth and uneven, so the master of the press must control the machine. Play a good product.
Third, polishing. This is the most important part of the production process of brass handbag snap fasteners. Just like women's jewelry, the sparkling is very bright and smooth because of the high degree of polishing and polishing, and then the electroplating can produce such a shining effect. In fact, the handbag snaps this line, one pass, and many hardware production processes such as jewelry are the same process, so the things that are very smooth and shiny are polished.
Fourth, the upper leg. Because it is necessary to fix the product on the bag, it is necessary to apply the wire leg piece. The wire is fixed on the leg piece and is die-casted by die-casting. It used to be pressed with a three-ton punch. Now it is changed to use the machine rig to press it down. Fixed, now using the rig, the technology has also improved, the production tools have also changed! There is also a link is some of the screws, so to attack a screw hole out, here is the use of tapping machine Attack a screw hole out!
Finally, give the product a color plating link. Electroplating here depends on the technology of the electroplating master. First, it is necessary to wash the impurities in the product area with sulfuric acid, and then base the product. The thicker the bottom, the better, and then put it into the plating tank for plating. The plating time is too long. If it is too short, it will not work anymore. The plating is completed. The product is packaged and sent to the customer.
Brass handbag snap repair method
1. The brass handbag buckle on the bag is a synthetic metal gold plating process. The brass handbag does not need to be in contact with water. The bag is often used. The metal coating on the surface will fall off and it will rust when exposed to water. If the brass handbag is in contact with water, please wipe it off with a soft cotton cloth as soon as possible.
2. When cleaning the bag, use the special cleaning agent for the bag hardware to clean it.
3. If the bag is not used frequently, it is recommended to wrap the metal details of the bag with a dust-proof film.
4. regularly sent to the leather goods store for maintenance. To maintain the appearance of the bag, extend the life of the bag, send a professional maintenance shop for maintenance is the most appropriate, leather maintenance shop maintenance method is more professional.
The above is about the production process and maintenance method of the brass handbag snap. I hope everyone can understand the process and maintenance method of the brass handbag snap, which will help everyone.
